CAT 10R7652 injector
100% Split Cylindrical Re Bearing Type Authentic. CAT 10R7652 injector 9-1/2 in Dimension H Highest Quality. OIA Pump Machinery Parts Co., Ltd. Certified Supplier.
| Brand Name: | CAT |
| Model Number: | 10R7652 |
| Control Fluid Drain: | 6906ZENR |
| Drive Speed: | 30x47x9 |
| Torque: | 30 |
| Maximum Axial Force At Standstill: | 47 |
| Maximum angular acceleration: | 9 |
| Flow: | 30 mm |
| Maximum Torque: | 47 mm |
| Maximum Permissible Speed (limit Speed): | 9 mm |
Product Details
| Control Fluid Drain | 6906ZENR |
| Drive Speed | 30x47x9 |
| Torque | 30 |
| Maximum Axial Force At Standstill | 47 |
| Maximum angular acceleration | 9 |
| Flow | 30 mm |
| Maximum Torque | 47 mm |
| Maximum Permissible Speed (limit Speed) | 9 mm |
| Pilot Pressure | 9 mm |
| Sequence Valve | 1.7 mm |
| Voltage | 0.95 mm |
| Pressurefree Operation | 0.85 mm |
| Power | 0.3 mm |
| Maximum Volume Flow | 0.3 mm |
| Moment of inertia rotary group | 45.7 mm |
| Nominal Resistance | 49.8 mm |
| Case volume | 0.047 Kg |
| Drive Power | 7,25 kN |
| Control Pressure Measurement | 5 kN |
| Rotary stiffness | 14000 r/min |
| Load Pressure | Single Shield with Snap Ring |
| Maximum Permissible Pilot Pressure | Cylindrical Bore |
| Weight (approx.) | Single Row |
| Rate Of Pressure ChangeDisplacement, geometric, per revolution | 30 mm |
| Maximum rotational speed | 47 mm |
| Determining Operating Characteristics | 9 mm |
| Fillet Radius/Chamfer | 0.3 mm |
| r1 | 0.3 mm |
| Snap Ring Width | 0.9 mm |
| Snap Ring Outside Diameter | 49.8 mm |
| D1 (max) | 45.7 mm |
| a (max) | 1.7 mm |
| b (min) | 1 mm |
| Dynamic Load Rating | 7,250 N |
| Static Load Rating | 5,000 N |
| Limiting Speed - Grease | 14,000 rpm |
| Limiting Speed - Oil | 17,000 rpm |
| Factor fo | 15.8 |
| Radial Clearance | 0.005 to 0.020 mm |
| da (min) | 32 mm |
| Da (max) | 45 mm |
| Dx (min) | 50.5 mm |
| ra (max) | 0.3 mm |
| Cy (max) | 2.3 mm |