Rexroth HED8OH THROTTLE VALVE
Rexroth HED8OH THROTTLE VALVE 98 Bore Diameter (mm) Warehouse offers car parts and 1,5 mm ra max. car accessories. We sell discount Rexroth THROTTLE VALVE online 132 Outer Diameter (mm) as well as OIA Pump Machinery Parts Co., Ltd. cheap machinery parts.
| Brand Name: | Rexroth |
| Model Number: | HED8OH |
| Rotary stiffness: | Mounted Bearing |
| Maximum Permissible Pilot Pressure: | 22215 |
| Pressurefree Operation: | 2-3/4 in |
| Maximum Permissible Speed (limit Speed): | Imperial |
| Maximum Torque: | QAPF15A212SB |
| Torque: | Single Concentric |
| Maximum angular acceleration: | 27 lb |
| Weight (approx.): | Four-Bolt Pillow Block |
Product Details
| Rotary stiffness | Mounted Bearing |
| Maximum Permissible Pilot Pressure | 22215 |
| Pressurefree Operation | 2-3/4 in |
| Maximum Permissible Speed (limit Speed) | Imperial |
| Maximum Torque | QAPF15A212SB |
| Torque | Single Concentric |
| Maximum angular acceleration | 27 lb |
| Weight (approx.) | Four-Bolt Pillow Block |
| Pilot Pressure | 0883450331685 |
| Flow | 3.25 in |
| Case volume | 6.60 in |
| Control Pressure Measurement | 4.29 in |
| Nominal Resistance | 9.10 in |
| Drive Speed | 7.60 in |
| Maximum Volume Flow | 1.88 in |
| Maximum rotational speed | 10.44 in |
| Power | 3.130 in |
| Drive Power | 1.29 in |
| Control Fluid Drain | 0.625 in |
| Voltage | 1.25 in |
| Maximum Axial Force At Standstill | 3.94 in |
| Rate Of Pressure ChangeDisplacement, geometric, per revolution | 2.37 in |
| Determining Operating Characteristics | 0.24 in |
| Sequence Valve | 3.62 in |
| Load Pressure | 54100 lb |
| Moment of inertia rotary group | 49900 lb |
| e - Geometry Factor | 0.22 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0020 in |
| Eng Internal Radial Clearance - Min | 0.0020 |
| Eng Internal Radial Clearance - Max | 0.0031 |
| Pre Install Clearance Min | 0.0020 in |
| Pre Install Clearance Max | 0.0031 in |