| Case volume | 6309NR |
| Control Pressure Measurement | 45x100x25 |
| Drive Speed | 45 |
| Weight (approx.) | 100 |
| Torque | 25 |
| Voltage | 45 mm |
| Maximum rotational speed | 100 mm |
| Sequence Valve | 25 mm |
| Maximum Axial Force At Standstill | 25 mm |
| Maximum Permissible Pilot Pressure | 0,5 mm |
| Rate Of Pressure ChangeDisplacement, geometric, per revolution | 3,28 mm |
| Determining Operating Characteristics | 2,7 mm |
| Nominal Resistance | 2,46 mm |
| Power | 1,5 mm |
| Pilot Pressure | 0,6 mm |
| Maximum Volume Flow | 96,8 mm |
| Flow | 106,5 mm |
| Rotary stiffness | 53 mm |
| Moment of inertia rotary group | 61,5 mm |
| Load Pressure | 92 mm |
| Drive Power | 1,5 mm |
| Pressurefree Operation | 108 mm |
| Maximum Permissible Speed (limit Speed) | 5,4 mm |
| Maximum Torque | 2,5 mm |
| Control Fluid Drain | 0,5 mm |
| Maximum angular acceleration | 0,814 Kg |
| Basic dynamic load rating (C) | 53 kN |
| Basic static load rating (C0) | 32 kN |
| (Grease) Lubrication Speed | 7 000 r/min |
| (Oil) Lubrication Speed | 8 200 r/min |
| a min | 3.07 mm |
| a max | 3.28 mm |
| Ca min | 5.43 mm |
| Ca max | 5.74 mm |
| rs min | 1.5 mm |
| rNs min | 0.5 mm |
| D3 max | 96.8 mm |
| b min | 2.7 mm |
| b max | 3 mm |
| r0 max | 0.6 mm |
| D4 max | 106.5 mm |
| Snap ring reference | R100 |
| Radial clearance class | CN |
| Mass | 0.81 kg |
| Dynamic load, C | 53 kN |
| Static load, C0 | 32 kN |
| Fatigue limit load, Cu | 1.45 kN |
| f0 | 13.1 |
| Nlim (oil) | 8,200 rpm |
| Nlim (grease) | 7,000 rpm |
| Min operating temperature, Tmin | -20 °C |
| Max operating temperature, Tmax | 120 °C |
| Characteristic cage frequency, FTF | 0.38 Hz |
| Characteristic rolling element frequency, BSF | 4 Hz |
| Characteristic outer ring frequency, BPF0 | 3.06 Hz |
| Characteristic inner ring frequency, BPFI | 4.94 Hz |
| da min | 53 mm |
| Da max | 92 mm |
| ra max | 1.5 mm |
| rNa max | 0.5 mm |
| Db min | 108 mm |
| Category | Single Row Ball Bearing |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| Weight / Kilogram | 0.85 |
| Product Group | B00308 |
| Enclosure | Open |
| Precision Class | ABEC 1 | ISO P0 |
| Maximum Capacity / Filling Slot | No |
| Rolling Element | Ball Bearing |
| Snap Ring | Yes |
| Internal Special Features | No |
| Cage Material | Steel |
| Internal Clearance | C0-Medium |
| Inch - Metric | Metric |
| Long Description | 45MM Bore; 100MM Outside Diameter; 25MM Outer Race Diameter; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features |
| UNSPSC | 31171504 |
| Harmonized Tariff Code | 8482.10.50.68 |
| Noun | Bearing |
| Keyword String | Ball |
| Manufacturer Item Number | 6309.NR |
| Weight / LBS | 1.877 |
| Outside Diameter | 3.937 Inch | 100 Millimeter |
| Bore | 1.772 Inch | 45 Millimeter |
| Outer Race Width | 0.984 Inch | 25 Millimeter |
| bore diameter: | 45 mm |
| precision rating: | ISO Class 0 |
| outside diameter: | 100 mm |
| finish/coating: | Uncoated |
| overall width: | 25 mm |
| bearing material: | High Carbon Chrome Steel |
| bore type: | Round |
| cage material: | Steel |
| closure type: | Open |
| inner ring width: | 25 mm |
| row type & fill slot: | Single Row Non-Fill Slot |
| outer ring width: | 25 mm |
| snap ring included: | With Snap Ring |
| maximum rpm (grease): | 7000 rpm |
| internal clearance: | CN |
| maximum rpm (oil): | 8200 rpm |
| operating temperature range: | -40 to 120 ºC |
| fillet radius: | 1.5 mm |
| dynamic load capacity: | 53000 N |
| manufacturer product page: | Click here |
| static load capacity: | 32000 N |
